Ethernet Wiring
The MTC16 uses 10/100Base-T Ethernet communications. It only requires 4 wires (2 pairs) to operate.
| Signal | MTC Pin | RJ45 Pin | Colour |
|---|---|---|---|
| Rx+ | C20 | 3 | Orange/White |
| Rx- | C21 | 6 | Orange |
| Tx+ | C22 | 1 | Green/White |
| Tx- | C23 | 2 | Green |
No special ethernet configuration is required. MectriCal will detect the device using an IPv6 Link Local Address.