MVIC Datasheet

The Mectric Vehicle Integration Controller (MVIC) is a fully featured, user definable, programmable CAN translation unit. It’s 2x CAN 2.0B/FD interfaces can be configured to send and receive a virtually limitless combination of data. Powerful firmware and an intuitive user interface allows the generation of thousands of predefined and custom channels.

Applications

• Integration of aftermarket ECU’s with OEM systems.
• Integration of cross-brand aftermarket systems.
• Complex custom logic control for extending existing system controls.
• Reverse engineering.
• CAN protocol prototyping.

Wiring Pinout

Features

Processor

• 96 MHz, 32bit Automotive Processor w/ FPU.
• 2x Controller Area Network (CAN) interfaces, up to 5 Mbit/s
• Compatible with CAN 2.0A/B and CAN-FD (ISO 11898-1:2015)
• USB-C PC interface.
• Configuration, live data, firmware updates over USB.

CAN

• 2x CAN FD Hardware Nodes.
• Over voltage & ESD protected.
• Fully user definable CAN streams.
• Compound message frames and sequential ID frames supported.
• User definable Rx/Tx parameters with custom bit lengths, factor, & offset.
• Predefined standard transmit and receive data sets.

Firmware

• Multi-threaded Realtime Operating System.
• User CAN Signal Objects w/ user defined bit positions, factor, offset, multiplexing.
• Dynamic 4D Tables w/ freely configurable X,Y,Z axes.
• Math Expression Parsers, 32 characters, including math, logic and bitwise operations.
• Combinational Logic Blocks, 4 inputs per block, on/off delays.
• CAN bus diagnostics and error detection.

MecScript

• C-Style syntax.
• Statically typed.
• Heap-less, memory safe design.
• Non-interpreted, compiled to byte-code before upload to device.
• 64kb of Compiled User Code Storage (ROM).
• 64kb of User Code Stack Memory (RAM).
• Edit in MectriCal or in external editors such as VS Code.

Programming

All device configuration and firmware updates are done via USB-C connection with our free MectriCal PC Software.

Device Specifications